Combining the Sony VENICE with the Extension System allows you to separate the sensor and lens mount from the main body via a tethered cable up to 5.5m in length. This compact and lightweight block is great for specialist rigs, such as gimbals and car mounts without any loss in quality over the standard all-in-one setup.
FRAME RATE OPTIONS (Firmware V4.0)
X-OCN 16bit RAW LT ST XT (It requires the AXS-R7 RAW Recorder)
Unparalleled flexibility with uncompromised image quality:
The VENICE Extension System (CBK-3610XS) enables cabled separation of the VENICE camera body and image sensor block by up to 5.5m with no degradation in image quality.
The Extension System also has an HD-SDI output and a 24V output for powering accessories such as lens servo motors and monitoring. Multiple screw holes on all surfaces make it easy to affix additional accessories and fit with a wide variety of rigs. The Extension System is fully compatible with all existing and future VENICE cameras upgraded to V3 or higher firmware.
Enhanced mobility and maneuverability:
Separation of the camera body and image sensor block by up to 5.5m enables exceptional flexibility when filming with gimbals, handheld, in helicopter/underwater housings, with custom rigs such as for 3D/VR contents and shooting scenes in confined spaces such as vehicles. The separated image block is just 1.9 kg (4lb) with PL mount and 1.4kg (3lb) with E-mount for the utmost shooting flexibility.
Uncompromised image quality:
When shooting with CBK-3610XS there’s no degradation in image quality. Whether shooting with a standard 2.7m separation or using the extension cable for a maximum 5.5m separation, you can be sure the image quality is the same as shooting with VENICE in standard configuration.
CBK-3610XS preserves full use of the advanced features VENICE offers such as its built-in 8-step glass ND filter system, Dual Base ISO and more.
Hire a Sony VENICE with the Extension System from us and you’ll find the following included: