Shift 4 stocks an unrivalled range of cameras for hire with tripods, gimbals, lenses, monitors, matte boxes, camera accessories and data storage to complete your kit.
To discuss your requirements, get advice or make a booking, call us on +44 (0)20 8809 8680 or email [email protected]
The Focusbug Cine RT is an ultrasonic distance measurer with wireless accessories. The brain is built directly into the horns so is all that is needed to be mounted to the camera, which then talks wirelessly to the distance display and laser distance measure to create accurate marks for focus pulling.
The Focusbug Cine RT is an ultrasonic distance measurer with wireless accessories. The brain is built directly into the horns so is all that is needed to be mounted to the camera, which then talks wirelessly to the distance display and laser distance measure to create accurate marks for focus pulling.
This external EVF has a 0.71" OLED display with full 1920x1080 resolution. It can accept 4K signals via HDMI and allows the loading of 3D LUTs. This is perfect for adding a viewfinder to stills cameras or cine cameras like the RED Komodo and Raptor.
This external EVF has a 0.71" OLED display with full 1920x1080 resolution. It can accept 4K signals via HDMI and allows the loading of 3D LUTs. This is perfect for adding a viewfinder to stills cameras or cine cameras like the RED Komodo and Raptor.
The VoxBox Pro is a compact unit with a two way mirror, designed for allowing interviewees to look down the lens while being interviewed, as well as doubling as a telepromter when used with a tablet. It's lightweight size means it can be mounted onto 15mm rails making it quick and easy to take on and off of the camera.
The VoxBox Pro is a compact unit with a two way mirror, designed for allowing interviewees to look down the lens while being interviewed, as well as doubling as a telepromter when used with a tablet. It's lightweight size means it can be mounted onto 15mm rails making it quick and easy to take on and off of the camera.
This MOY to MOY fitting plate is used to offset the connection between grips and a head so a head can be placed over surfaces the grips equipment can't. It can rotate around for easy positioning and rigging.
This MOY to MOY fitting plate is used to offset the connection between grips and a head so a head can be placed over surfaces the grips equipment can't. It can rotate around for easy positioning and rigging.
This ring is compatible with all Ronin single hand gimbals to allow for a setup more like a full sized gimbal. It has feet so that it can be placed on the ground easily. It also has an ARRI gear adaptor attached to the side for easier mounting of focus accessories.
This ring is compatible with all Ronin single hand gimbals to allow for a setup more like a full sized gimbal. It has feet so that it can be placed on the ground easily. It also has an ARRI gear adaptor attached to the side for easier mounting of focus accessories.
This small splash bag can fit any model of A7S into it with a stills style lens. It seals at the top with screws so can be submerged to just under the water line if sealed properly. The bag has a flat round glass and screw in donuts to wedge the lens for clear field of view for the lens.
This small splash bag can fit any model of A7S into it with a stills style lens. It seals at the top with screws so can be submerged to just under the water line if sealed properly. The bag has a flat round glass and screw in donuts to wedge the lens for clear field of view for the lens.
This vibration isolator has been designed by FoMa Systems for ARRI, it has a MOY to MOY mount and uses adjustable rubber dampeners to remove shake from cameras when on a surface serspetable to vibrations.
This vibration isolator has been designed by FoMa Systems for ARRI, it has a MOY to MOY mount and uses adjustable rubber dampeners to remove shake from cameras when on a surface serspetable to vibrations.
This Tiffen Bronze Glimmerglass PV (4x5.65) Filter Set utilises bronze flecks to soften fine detail, giving a glow to highlights and lowering contrast across the image. The bronze flecks also warm the image in comparison to the neutral silver of Glimmerglass Filters. The set includes grades 1/8, 1/4, 1/2, 1 and 2.
This Tiffen Bronze Glimmerglass PV (4x5.65) Filter Set utilises bronze flecks to soften fine detail, giving a glow to highlights and lowering contrast across the image. The bronze flecks also warm the image in comparison to the neutral silver of Glimmerglass Filters. The set includes grades 1/8, 1/4, 1/2, 1 and 2.
This set of Low Contrast Tiffen filters create an even vale flare across the entire image which raises the level of shadow areas, balancing the ratio between highlights and shadows to low the contrast of high contrast environments. This set goes from 1/8 to 2.
This set of Low Contrast Tiffen filters create an even vale flare across the entire image which raises the level of shadow areas, balancing the ratio between highlights and shadows to low the contrast of high contrast environments. This set goes from 1/8 to 2.
This handle set allows for rigging different handle configurations including 15 and 19mm brackets as well as long and short extension bars.
This handle set allows for rigging different handle configurations including 15 and 19mm brackets as well as long and short extension bars.
This rain deflector uses a spinning piece of glass that throws dropplets off to the sides instantly, keeping the lens clear of water when shooting in environments like rain. It is small and compact and designed to fit directly into the PV filter slots of matteboxes such as LMB 4x5s or LMB 25s.
This rain deflector uses a spinning piece of glass that throws dropplets off to the sides instantly, keeping the lens clear of water when shooting in environments like rain. It is small and compact and designed to fit directly into the PV filter slots of matteboxes such as LMB 4x5s or LMB 25s.
These small 98wh batteries fit on any vlock plate but are half the size of DUO batts. Using the A-VMIRCO2 plate allows for 2 to be used at once for just under 200wh as well as hotswap capabilities. Perfect for flying abroad or use individually as a compact alternative to standard vlock batteries
These small 98wh batteries fit on any vlock plate but are half the size of DUO batts. Using the A-VMIRCO2 plate allows for 2 to be used at once for just under 200wh as well as hotswap capabilities. Perfect for flying abroad or use individually as a compact alternative to standard vlock batteries
This wireless lens control hand unit from ARRI can control 3 axis and offers advanced features such as interchangeable radio modules, auto-detecting focus rings, as well as ARRI and third-party camera setting control. When used with a C-force Mini RF motor, allows for a compact Alexa Mini style setup on any camera.
This wireless lens control hand unit from ARRI can control 3 axis and offers advanced features such as interchangeable radio modules, auto-detecting focus rings, as well as ARRI and third-party camera setting control. When used with a C-force Mini RF motor, allows for a compact Alexa Mini style setup on any camera.
These full-spectrum NDs are completely colour neutral and eliminate IR pollution without reducing any of the light spectrum from reaching the sensor, unlike conventional IRNDs, resulting in stronger colour replication
These full-spectrum NDs are completely colour neutral and eliminate IR pollution without reducing any of the light spectrum from reaching the sensor, unlike conventional IRNDs, resulting in stronger colour replication
This sideways mounting handle is designed to fit to the front or back of ARRI top handles for better low handheld operating.
This sideways mounting handle is designed to fit to the front or back of ARRI top handles for better low handheld operating.
This side plate is designed to attach to the MSB-3 side bracket of an Alexa Mini or Alexa Mini LF for additional mounting positions.
This side plate is designed to attach to the MSB-3 side bracket of an Alexa Mini or Alexa Mini LF for additional mounting positions.
This compact block battery has a 880wh capacity and provides 2x 4pin XLR 14v or 2x 3pin XLR 28v outputs. The battery has a built-in charger and a digital display that shows charging status and active outputs.
This compact block battery has a 880wh capacity and provides 2x 4pin XLR 14v or 2x 3pin XLR 28v outputs. The battery has a built-in charger and a digital display that shows charging status and active outputs.
This PL mount adaptor extends the focal length of lenses by 1.4x and covers full frame sensors, with a light loss of approx. 1 1/3 stops.
This PL mount adaptor extends the focal length of lenses by 1.4x and covers full frame sensors, with a light loss of approx. 1 1/3 stops.
This PL mount adaptor extends the focal length of lenses by 2x and covers full frame sensors, with a light loss of approx. 2 stops.
This PL mount adaptor extends the focal length of lenses by 2x and covers full frame sensors, with a light loss of approx. 2 stops.
This E-mount converter doubles the focal lengths of the lenses mounted on it and maintains full functionality of Sony's advanced autofocus features with cameras likes the FX9 using compatible lenses.
This E-mount converter doubles the focal lengths of the lenses mounted on it and maintains full functionality of Sony's advanced autofocus features with cameras likes the FX9 using compatible lenses.
The Ergorig works like a steadicam vest and takes the weight of the camera off the shoulder and back and distributes it to the hips, but retains the natural operating on the shoulder.
The Ergorig works like a steadicam vest and takes the weight of the camera off the shoulder and back and distributes it to the hips, but retains the natural operating on the shoulder.
This battery belt allows the use of 2 V-Lok batteries wired in parallel to power a camera via 12v power, this means using 2 150wh batteries will supply the camera with 300wh power. Taking the battery weight off the camera allows for lighter weight setups on the shoulder or in the hand.
This battery belt allows the use of 2 V-Lok batteries wired in parallel to power a camera via 12v power, this means using 2 150wh batteries will supply the camera with 300wh power. Taking the battery weight off the camera allows for lighter weight setups on the shoulder or in the hand.
This Cine Tape Measure System device uses ultrasonic waves to continuously calculate the distance between a subject and the camera's film-plane and shows values in real time to assist pulling focus. The CineTape 2 is smaller and lighter than the original.
This Cine Tape Measure System device uses ultrasonic waves to continuously calculate the distance between a subject and the camera's film-plane and shows values in real time to assist pulling focus. The CineTape 2 is smaller and lighter than the original.
This Teleprompter is a compact, lightweight unit, providing a full teleprompting experience using either IPad, Android or Windows tablets. Designed to be quick and easy to set up with an adjustable glass frame and quick release base plate unit. The Sony A7 series, Canon DSLRs , PXW-X200 size units are a just few of the cameras suited to this model.
This Teleprompter is a compact, lightweight unit, providing a full teleprompting experience using either IPad, Android or Windows tablets. Designed to be quick and easy to set up with an adjustable glass frame and quick release base plate unit. The Sony A7 series, Canon DSLRs , PXW-X200 size units are a just few of ...
These diffusion filters give highlights a heavy bloom mimicking the look of smoke in a scene. These are great for complimenting actual smoke on set to give a consistent look across a large set or giving the aesthetic where smoke can’t be used.
These diffusion filters give highlights a heavy bloom mimicking the look of smoke in a scene. These are great for complimenting actual smoke on set to give a consistent look across a large set or giving the aesthetic where smoke can’t be used.
ARRI’s SXU-1 (Single Axis Unit) is designed to control 1 axis of a lens wirelessly. The handset combined with ARRI’s RF Mini Gear, makes the perfect compact set up for wireless focus pulling. As there’s no brain to mount it makes the kit ideal for gimbal set ups where weigh and space are a factor.
ARRI’s SXU-1 (Single Axis Unit) is designed to control 1 axis of a lens wirelessly. The handset combined with ARRI’s RF Mini Gear, makes the perfect compact set up for wireless focus pulling. As there’s no brain to mount it makes the kit ideal for gimbal set ups where weigh and space are a factor.
The Heated Eyecup HE-7 is designed to reduce fogging or freezing in the EVF for ARRI Alexa Mini and Amira cameras.
The Heated Eyecup HE-7 is designed to reduce fogging or freezing in the EVF for ARRI Alexa Mini and Amira cameras.
The Syncbac pro is designed to timecode sync and control multiple GoPro Hero 4’s. Its wireless function means that multiple GoPros can be synced from one device using BLINK Hub app but the App also control start/stop recording as well as see live status of multiple GoPros.
The Syncbac pro is designed to timecode sync and control multiple GoPro Hero 4’s. Its wireless function means that multiple GoPros can be synced from one device using BLINK Hub app but the App also control start/stop recording as well as see live status of multiple GoPros.
The Syncbac Pro is designed to timecode sync and control multiple Go Pro Hero 6’s. It’s wireless function means not only can multiple go pros be synced from one device but can also be used with an App to start/stop recording as well as see live status of multiple Go Pros.
The Syncbac Pro is designed to timecode sync and control multiple Go Pro Hero 6’s. It’s wireless function means not only can multiple go pros be synced from one device but can also be used with an App to start/stop recording as well as see live status of multiple Go Pros.
The Tentacle TE1 Sync is an incredibly small and light weight timecode sync box design specifically for DSLRs. The unit uses mini jack connections and has an internal mic specifically for DSLR syncing, so one audio channel on the camera is timecode and the other reference audio.
The Tentacle TE1 Sync is an incredibly small and light weight timecode sync box design specifically for DSLRs. The unit uses mini jack connections and has an internal mic specifically for DSLR syncing, so one audio channel on the camera is timecode and the other reference audio.
The ARRI ZMU-3A Zoom Demand provides control of the zoom ring of a cine lens, although it can control the focus or iris if required as well as sending a Run command to the camera.
The ARRI ZMU-3A Zoom Demand provides control of the zoom ring of a cine lens, although it can control the focus or iris if required as well as sending a Run command to the camera.
The ARRI UMC-4 Universal Motor Control Unit is a compact wireless lens control unit that comes with 3 x ARRI CLM-4 Control Lens Motors and is controlled wirelessly by the ARRI WCU-4 Wireless Lens Control Unit to give wireless remote control over focus, iris and zoom.
The ARRI UMC-4 Universal Motor Control Unit is a compact wireless lens control unit that comes with 3 x ARRI CLM-4 Control Lens Motors and is controlled wirelessly by the ARRI WCU-4 Wireless Lens Control Unit to give wireless remote control over focus, iris and zoom.
The ARRI AMC-1 Active Motor Controller is a lightweight and compact wireless lens control unit that comes with 3 x CMotion CForce Mini Lens Motors and is controlled wirelessly by the ARRI WCU-4 Wireless Control Unit to give wireless remote control over focus, iris and zoom.
The ARRI AMC-1 Active Motor Controller is a lightweight and compact wireless lens control unit that comes with 3 x CMotion CForce Mini Lens Motors and is controlled wirelessly by the ARRI WCU-4 Wireless Control Unit to give wireless remote control over focus, iris and zoom.
This ARRI WCU-4 Wireless Lens Control Unit is the universal wireless 3-axis lens controller that works with the ARRI UMC-4 Universal Motor Control Unit plus ARRI CLM-4 Control Lens Motors, the ARRI AMC-1 Active Motor Controller plus CMotion CForce Lens Motors and ARRI ALEXA Mini plus CMotion CForce Lens Motors.
This ARRI WCU-4 Wireless Lens Control Unit is the universal wireless 3-axis lens controller that works with the ARRI UMC-4 Universal Motor Control Unit plus ARRI CLM-4 Control Lens Motors, the ARRI AMC-1 Active Motor Controller plus CMotion CForce Lens Motors and ARRI ALEXA Mini plus CMotion CForce Lens Motors.
This SmallHD 502 Sidefinder Viewfinder can attach to a SmallHD 502 monitor to turn it into an electronic viewfinder. It uses a mirror so the monitor faces sideways on the camera to reduce it’s profile and covers the monitor for better use in sunlight.
This SmallHD 502 Sidefinder Viewfinder can attach to a SmallHD 502 monitor to turn it into an electronic viewfinder. It uses a mirror so the monitor faces sideways on the camera to reduce it’s profile and covers the monitor for better use in sunlight.
The ARRI Diopter Stage 138mm allows the mounting of 138mm full and half diopters either on the back of an ARRI LMB-25 Matte Box or straight onto the lens using clip on clamp.
The ARRI Diopter Stage 138mm allows the mounting of 138mm full and half diopters either on the back of an ARRI LMB-25 Matte Box or straight onto the lens using clip on clamp.
The Flowcine Serene is a stabiliser accessory for the Easyrig which acts as a Steadicam, stabilising up and down movement. It's particularly useful for gimbal operation.
The Flowcine Serene is a stabiliser accessory for the Easyrig which acts as a Steadicam, stabilising up and down movement. It's particularly useful for gimbal operation.
The Zacuto Gratical HD EVF Viewfinder is a 0.61” micro-OLED HD universal EVF with both HD-SDI and HDMI inputs and outputs that supports basic and cross-conversion loop-through.
The Zacuto Gratical HD EVF Viewfinder is a 0.61” micro-OLED HD universal EVF with both HD-SDI and HDMI inputs and outputs that supports basic and cross-conversion loop-through.
This ARRI Master Grip provides motor control of the zoom ring of a cine lens, although it can be set to control zoom, focus or iris. It attaches as the right handle of a set of moose bars for smoother control of the lens while hand held. It also has a camera run button.
This ARRI Master Grip provides motor control of the zoom ring of a cine lens, although it can be set to control zoom, focus or iris. It attaches as the right handle of a set of moose bars for smoother control of the lens while hand held. It also has a camera run button.
The Zacuto Z-DRW Drive Follow Focus Unit is a lightweight follow focus designed at an angle to be more suitable for short stills lenses and compact rigs.
The Zacuto Z-DRW Drive Follow Focus Unit is a lightweight follow focus designed at an angle to be more suitable for short stills lenses and compact rigs.
This Vocas Wooden Handgrip for ARRI Cameras is a right hand wooden grip handle with built-in record button to trigger record start and record stop. It can be attached to our moose bars or compatible baseplates using the ARRI rosette and is ideal for use with ARRI ALEXAs and AMIRAs.
This Vocas Wooden Handgrip for ARRI Cameras is a right hand wooden grip handle with built-in record button to trigger record start and record stop. It can be attached to our moose bars or compatible baseplates using the ARRI rosette and is ideal for use with ARRI ALEXAs and AMIRAs.
This Zacuto C300 Z-Finder is an attachable viewfinder for the C300 which allows better visibility of the LCD screen in direct sunlight. It also comes with an offset arm to allow the monitor to be in a more natural operating position.
This Zacuto C300 Z-Finder is an attachable viewfinder for the C300 which allows better visibility of the LCD screen in direct sunlight. It also comes with an offset arm to allow the monitor to be in a more natural operating position.
The Shape ICON 2V Wireless Director’s Kit is designed to provide a supportive handheld rig for a monitor and wireless video receivers using a cheese plate with power provided via a V-Lock battery plate and up to 3 x D-Tap connections. We also have an in-house designed dual receiver bracket for mounting 2 x Teradek receivers when monitoring two cameras.
The Shape ICON 2V Wireless Director’s Kit is designed to provide a supportive handheld rig for a monitor and wireless video receivers using a cheese plate with power provided via a V-Lock battery plate and up to 3 x D-Tap connections. We also have an in-house designed dual receiver bracket for mounting 2 x Teradek ...
This Tiffen Black Satin PV (4x5.65) Filter Set comprises 4 PV sized diffusion filters which utilise black flecks to soften fine detail, giving a glow to highlights and slightly lowering contrast across the image. The set includes grades 1/4, 1/2, 1 and 2.
This Tiffen Black Satin PV (4x5.65) Filter Set comprises 4 PV sized diffusion filters which utilise black flecks to soften fine detail, giving a glow to highlights and slightly lowering contrast across the image. The set includes grades 1/4, 1/2, 1 and 2.
This Tiffen Glimmerglass PV (4x5.65) Filter Set comprises 4 PV sized diffusion filters which utilise silver flecks to soften fine detail, giving a glow to highlights and lowering contrast across the image. The set includes grades 1/4, 1/2, 1 and 2.
This Tiffen Glimmerglass PV (4x5.65) Filter Set comprises 4 PV sized diffusion filters which utilise silver flecks to soften fine detail, giving a glow to highlights and lowering contrast across the image. The set includes grades 1/4, 1/2, 1 and 2.
The Tiffen Multi Rota Tray is a geared rotating tray that allows the use and rotation of a 138mm Circular Polarizer and Variable ND in a 4×5.650 tray. It's ideal for matte boxes without a rotating filter stage or for those instances where a secondary rotating filter stage is required in a non-rotating stage. Suitable for ARRI LMB 25/5 matte boxes.
The Tiffen Multi Rota Tray is a geared rotating tray that allows the use and rotation of a 138mm Circular Polarizer and Variable ND in a 4×5.650 tray. It's ideal for matte boxes without a rotating filter stage or for those instances where a secondary rotating filter stage is required in a non-rotating stage. ...
This Canon Speedlite 430EX II Flash has a 180° swivel head, 24-105mm zoom and automatic exposure control with Canon DSLRs.
This Canon Speedlite 430EX II Flash has a 180° swivel head, 24-105mm zoom and automatic exposure control with Canon DSLRs.
The Tilta TT C300 Rig allows a C300 to be mounted on a 15mm and 19mm rail set up with space to attach accessories to the side.
The Tilta TT C300 Rig allows a C300 to be mounted on a 15mm and 19mm rail set up with space to attach accessories to the side.
This Canon BG-E11 Battery Grip extends the use of the 5D Mark III camera with the addition of two LP-E6 batteries. It also makes the camera easier to hold.
This Canon BG-E11 Battery Grip extends the use of the 5D Mark III camera with the addition of two LP-E6 batteries. It also makes the camera easier to hold.
Gives wireless control over focus, iris and zoom.
Gives wireless control over focus, iris and zoom.
This Cine Tape Measure System device uses ultrasonic waves to continuously calculate the distance between a subject and the camera's film-plane and shows values in real time to assist pulling focus.
This Cine Tape Measure System device uses ultrasonic waves to continuously calculate the distance between a subject and the camera's film-plane and shows values in real time to assist pulling focus.
This screw-in ND filter utilises two polariser filters to allow the dialling-in of specific ND.
This screw-in ND filter utilises two polariser filters to allow the dialling-in of specific ND.
This screw-in ND filter utilises two polariser filters to allow the dialling-in of specific ND values.
This screw-in ND filter utilises two polariser filters to allow the dialling-in of specific ND values.
This screw-in ND filter utilises two polariser filters to allow the dialling-in of specific ND values.
This screw-in ND filter utilises two polariser filters to allow the dialling-in of specific ND values.
This attachable viewfinder for the C300 allows better visibility of the screen in direct sunlight. It also has an offset arm to allow the monitor to be in a more natural operating position.
This attachable viewfinder for the C300 allows better visibility of the screen in direct sunlight. It also has an offset arm to allow the monitor to be in a more natural operating position.
This PL mount director's viewfinder accepts ARRI 435 ground glass markers.
This PL mount director's viewfinder accepts ARRI 435 ground glass markers.
This telescopic pole can mount a GoPro Hero at it’s top allowing handheld shots in awkward to reach locations.
This telescopic pole can mount a GoPro Hero at it’s top allowing handheld shots in awkward to reach locations.
This camera rig allows for the Sony PMW-300 to be easily mounted on the shoulder plus quick mount and release from any Sony style tripod baseplate in addition to power connections and BNC extensions.
This camera rig allows for the Sony PMW-300 to be easily mounted on the shoulder plus quick mount and release from any Sony style tripod baseplate in addition to power connections and BNC extensions.
This camera bag is a rucksack design for easier carrying of smaller camera kits.
This camera bag is a rucksack design for easier carrying of smaller camera kits.
This camera bag is a rucksack design for easier carrying of smaller camera kits.
This camera bag is a rucksack design for easier carrying of smaller camera kits.
This handheld bracket for the C300 fits onto 15mm rails and allows attachment of the C300 side grip as a handle, for easy access to controls when hand-held.
This handheld bracket for the C300 fits onto 15mm rails and allows attachment of the C300 side grip as a handle, for easy access to controls when hand-held.
A shoulder rig for the Canon XF305.
A shoulder rig for the Canon XF305.
A mirror rig to create eye contact between interviewer and interviewee while filming the subject straight on. Can be turned into a teleprompter by attaching a tablet computer.
A mirror rig to create eye contact between interviewer and interviewee while filming the subject straight on. Can be turned into a teleprompter by attaching a tablet computer.
The industry standard follow focus for 35mm and digital cinematography with 1:2 gear ratio for 35mm lenses.
The industry standard follow focus for 35mm and digital cinematography with 1:2 gear ratio for 35mm lenses.
A lightweight follow focus with 1:1 gear ratio for smaller lenses, such as ENG and stills lenses.
A lightweight follow focus with 1:1 gear ratio for smaller lenses, such as ENG and stills lenses.
A follow focus with 1:2 gear ratio for 35mm lenses.
A follow focus with 1:2 gear ratio for 35mm lenses.
An ultra lightweight follow focus unit with selectable hard stops and reversible direction, ideal for DSLR rigs.
An ultra lightweight follow focus unit with selectable hard stops and reversible direction, ideal for DSLR rigs.
The industry standard device for synchronising timecode between two or more cameras.
The industry standard device for synchronising timecode between two or more cameras.
Clapperboard with timecode display.
Clapperboard with timecode display.
A shoulder mount for all handheld camcorders and DSLR cameras.
A shoulder mount for all handheld camcorders and DSLR cameras.
Connects to PMW-F5, PMW-F55 and NEX-FS700 (via the HXR-IFR5 interface) to record 16bit 2K or 4k RAW onto AXS cards.
Connects to PMW-F5, PMW-F55 and NEX-FS700 (via the HXR-IFR5 interface) to record 16bit 2K or 4k RAW onto AXS cards.
This MOY fitting high hat has 3 tube legs with adjustable height and position to allow for the low mounting of tripod heads on uneven ground
This MOY fitting high hat has 3 tube legs with adjustable height and position to allow for the low mounting of tripod heads on uneven ground
This MOY fitting accessory allows for fast and precise tripod head levelling when using a Bazooka.
This MOY fitting accessory allows for fast and precise tripod head levelling when using a Bazooka.
Universal baseplate to fit all camcorders. Comes with 15mm rails and a shoulder pad.
Universal baseplate to fit all camcorders. Comes with 15mm rails and a shoulder pad.
Ideal for supporting the front of any shoulder mounted camera.
Ideal for supporting the front of any shoulder mounted camera.
White acrylic clapperboard with black and white sticks.
White acrylic clapperboard with black and white sticks.
3.5” LCD viewfinder with HD-SDI and HDMI loop-through inputs/outputs and HDMI to HD-SDI conversion.
3.5” LCD viewfinder with HD-SDI and HDMI loop-through inputs/outputs and HDMI to HD-SDI conversion.
An optical viewfinder that fits over the rear LCD screen of DSLR cameras.
An optical viewfinder that fits over the rear LCD screen of DSLR cameras.
Used as standard with ENG camera kits.
Used as standard with ENG camera kits.
Shift 4 stock a large selection of filters.
Shift 4 stock a large selection of filters.
Enables cameras to operate in sub-zero conditions.
Enables cameras to operate in sub-zero conditions.
Protects the Sony Z1 from dirt or water splashes.
Protects the Sony Z1 from dirt or water splashes.
To remotely operate the servo zoom on digital Canon ENG lenses.
To remotely operate the servo zoom on digital Canon ENG lenses.